Electronic Module Commissioned Production Service: Process and Key Points

**Electronic Module Entrusted Production Services: Processes and Essentials * *

In today's highly information age, electronic modules as a key component of all kinds of electronic equipment, its quality and production efficiency is directly related to the overall performance of the product and market competitiveness. Therefore, the electronic module commissioned production services are particularly important. This article will elaborate on the process of entrusted production of electronic modules and its key points to ensure the smooth progress of the production process and the high-quality delivery of the final product.

**1. electronic module commissioned production service process * *

**1. Design and Planning Phase * *

The first step in the commissioned production of electronic modules is design and planning. This stage mainly includes determining the functional and performance requirements of the module, conducting circuit design (including schematic drawing and PCB layout design), and selecting appropriate electronic components and components. After the design is completed, the PCB design documents need to be sent to a professional PCB manufacturer for production. At the same time, the required electronic components are purchased according to the design requirements, and strict quality inspections are carried out to ensure that all components meet specifications and quality standards.

**2. PCB Board Fabrication and Component Mount * *

PCB manufacturers produce PCB boards according to design documents and conduct quality inspections to ensure that they meet design requirements. Subsequently, the electronic components are mounted on the PCB board through SMT (surface mount technology) equipment, and the quality inspection after the patch is carried out, such as solder joint inspection, component polarity inspection, etc. For components that are not suitable for SMT patches, manual insertion is performed and welding equipment is used to ensure that the solder joints are firm and reliable. After the welding is completed, the PCB board needs to be cleaned to remove the flux and impurities.

**3. Electrical performance testing and software programming * *

After the PCB board is manufactured, electrical performance testing, including conduction test, resistance test, capacitance test, etc., is required to ensure that its electrical performance meets the design requirements. If the electronic module needs software support, software programming is also required, and the written software is burned into the chip of the module.

**4. Functional testing and debugging * *

After the software programming is completed, the electronic module needs to be functionally tested to verify whether it meets the design requirements. During the test, it is necessary to focus on whether the functions of the module are normal and whether there are potential problems. For the problems found in the test, it is necessary to debug and repair them in time until the module fully meets the requirements.

**5. ASSEMBLING AND PACKAGING * *

If the electronic module has a shell, the shell needs to be assembled. After assembly, the module is packaged to protect it from damage during transportation and storage. During the packaging process, attention should be paid to the selection of appropriate packaging materials and methods to ensure the safety of the module during transportation.

**6. QUALITY INSPECTION AND SHIPMENT * *

Finally, the final quality inspection of the packaged electronic module is carried out to ensure that its quality meets the standard. Only qualified modules can be shipped, delivered to customers or entered the next production link.

**2. electronic module commissioned production service points * *

**1. Strictly abide by the production process and quality standards * *

In the production process, the relevant production process and quality standards must be strictly observed to ensure product quality. This includes all aspects of component procurement, PCB board production, component mounting, welding, electrical performance testing, and functional testing, which must be operated and inspected in accordance with established process standards.

**2. Focus on the storage and management of electronic components * *

The storage and management of electronic components is critical to the quality of the module. It is necessary to ensure that the components are not affected by moisture, heat, static electricity, etc. during storage, so as not to affect their performance and stability. At the same time, it is necessary to establish a complete component management system to strictly control and record the procurement, warehousing, and outbound of components.

**3. Improve the skill level of operators * *

The operator is one of the key factors in the production process. It is necessary to carry out professional training for operators to make them familiar with production equipment and process flow, and master correct operation methods and skills. At the same time, it is necessary to organize training courses regularly to continuously improve the skill level and comprehensive quality of operators.

**4. Strengthen equipment maintenance and management * *

Equipment is an important guarantee in the production process. Regular maintenance and maintenance of the equipment is required to ensure its normal operation and extend its service life. At the same time, it is necessary to establish a reasonable spare parts management system to track and record the key spare parts required by the equipment to ensure that the equipment can be repaired and replaced in time when the equipment fails.

**5. Focus on environmental protection and production safety * *

In the production process, we should always pay attention to environmental protection and production safety. It is necessary to take effective measures to reduce the discharge of waste and pollutants and protect the ecological environment. At the same time, it is necessary to strengthen the safety production management to ensure the personal safety of operators and the stable operation of equipment.

**6. Strengthen quality control and testing * *

Quality control is the key to ensure product quality. Need to establish a sound quality control system

Email:
tongxx@fck.futaba.co.jp

Phone/WeChat:
136 0044 8978

Company Address:
4/F, Factory Building 1, No.2, Jinda Road, Huinan Industrial Park, Huiao Avenue, Huizhou City, Guangdong Province